Torque Calculator

Kuma lalle ne, haƙĩƙa, Allah Ya saukar da littattafai, da littattafai mãsu yawa, da littattafai mãsu yawa, da littattafai mãsu yawa.

N
m
N·m
°
Angle between the force and the lever arm.
rpm
Optional: adds mechanical power at this speed.
Torque (N·m) —
Torque (lb·ft) —
Force (N) —
Lever length (m) —
Power (W) —

Results update as you type.

Shin wannan Kalkulator ya ba ka amsa madaidaiciya?

Game da wannan Kalkulator

Torque is the rotational equivalent of force — the twisting effect a force has about a pivot. It is τ = F × r × sin(θ), where F is the applied force, r is the lever arm (distance from the pivot) and θ is the angle between the force and the arm. Only the component of force perpendicular to the lever produces rotation, so torque is greatest when the force is applied at a right angle (θ = 90°), reducing to the familiar τ = F × r. The SI unit is the newton-metre (N·m); this calculator also converts to pound-feet (1 N·m ≈ 0.7376 lb·ft).

As a worked example, pushing with 100 N at the end of a 0.5 m wrench, perpendicular to the handle, produces τ = 100 × 0.5 × sin(90°) = 50 N·m. Angle the same push at 30° to the handle and it drops to 100 × 0.5 × 0.5 = 25 N·m, because only half the force now acts crossways. This is why a longer wrench or a straight-on pull loosens a stubborn bolt more easily — you multiply either the lever arm or the effective force.

If you enter a rotational speed, the calculator also returns the mechanical power, P = τ × ω, where the angular speed ω = rpm × 2π / 60 in radians per second. The same torque delivers more power the faster it turns, which is the link between an engine’s torque and its horsepower. Torque calculations are essential for tightening fasteners to spec, sizing motors and gearboxes, designing levers and wrenches, and analysing any rotating machinery.

Tambayoyi da ake yi da yawa

Mẽne ne fom ɗin canzawa?

Torque equals force times lever length times the sine of the angle between them, τ = F × r × sin(θ). It is measured in newton-metres (N·m).

Me ya sa wannan gefen yake da muhimmanci?

Hanyar da za'a yi amfani da ita wajen juyawa ita ce ta hanyar amfani da ƙanshin ƙarfin da ke daidai da ƙanshin. A 90°, duk ƙarfin yana da tasiri; a 0° (da daidaitacce a kan ƙanshin) ƙarfin yana da sifar.

Shin, kunã da wani ilmi game da wannan?

Mechanical power is torque times angular speed, P = τ × ω, where ω = rpm × 2π / 60. The same torque delivers more power the faster it spins.

Me ya bambanta tsakanin ƙarfi da ƙarfi?

Force is a straight-line push or pull in newtons; torque is its turning effect about a pivot, in newton-metres, and depends on both the force and how far from the pivot it acts. The same force gives more torque on a longer lever arm.

Yadda zan canza newton-mita zuwa pound-feet?

Multiply N·m by 0.7376. So 50 N·m is about 36.9 lb·ft. The calculator shows both units, which is handy since torque specs are quoted in N·m in most of the world and lb·ft in the US.

Yadda zan samu karin ƙarfin jujjuyawar a kan wani bolt?

Increase the lever arm or the force, or apply the force at a right angle. A wrench twice as long, or a straight-on pull instead of an angled one, both multiply the torque for the same effort — which is why breaker bars work.

Shin, a'a, ƙofar ta canja zafin jiki sosai?

Na'am. Matsayin matsayin da sin (θ), don haka wani ƙarfi a tsakiyar lebur (0°) ba zai haifar da juyawa ba, 30° zai samar da rabin mafi girma, kuma kawai wani matsa lamba mai daidaituwa (90°) zai samar da cikakkun F × r. Ka riƙe ƙarfin da ya daidaita zuwa hannun don mafi yawan tasiri.

❤️ Love Calculator.Free? Share

𝕏  X Facebook Reddit
API — amfani da wannan calculator daga code

Ka kira wannan kwalban kamar wata maɓallin ƙarshe JSON mai kyauta - babu maɓalli da ake buƙata. Ka aika kimar fannin ƙasa kamar paramita na tambaya ko JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Read the full API docs →

Endpoint

GET https://calculator.free/api/v1/torque/

curl

curl "https://calculator.free/api/v1/torque/?solve=torque&force=100&length=0.5"

JavaScript fetch()

const r = await fetch(
  "https://calculator.free/api/v1/torque/?" + new URLSearchParams({
    "solve": "torque",
    "force": "100",
    "length": "0.5"
  }));
const data = await r.json();
console.log(data.results);

Results are estimates for general guidance only, not financial, medical or tax advice.