Àwọn

Wá àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè

Àwọn Àtòjọ-ẹ̀yàn —

_Ṣẹ̀dà —

Àwọn Àtòjọ-ẹ̀yàn àwọn ìṣàmúlò-ètò

Ńlà àwọn àwọn ààtò àtòjọ-ẹ̀yàn yìí?

Àkóónú ìṣàmúlò-ètò yìí

An nth root calculator finds the number that, raised to the power n, gives your value. Enter the value and the degree n, and it returns the root along with a check that raises the answer back to the nth power to confirm it lands on your original number.

The root is computed as value^(1/n), the inverse of raising to the power n. The square root uses n = 2 and the cube root n = 3. For example, the cube root of 27 is 27^(1/3) = 3, because 3 × 3 × 3 = 27, and the check shows 3 ^ 3 = 27. Odd roots of negative numbers are real and negative — the cube root of −8 is −2 — but even roots of negatives (like a square root of −4) have no real value, so the tool reports "no real root".

Roots appear in geometry, standard deviation, growth-rate averaging (the geometric mean) and physics. For a plain square root with simplified radical form, use the dedicated square root calculator; this tool handles any degree you enter.

Àwọn Àtòjọ-ẹ̀yàn

Bawo ní o ṣe lè rí àwọn ààyè àwọn ààyè àwọn ààyè?

Fi àwọn iǹtàn pàtó nínú ìpéwọ̀n 1/n. Àrẹ̀sì kúbù tí 27 ni 27^(1/3) = 3, nitori 3 × 3 × 3 = 27.

Ó lè gba àwọn ààyè-iṣẹ́ àwọn

Not within the real numbers — there is no real square root of −4. Odd roots of negatives are fine: the cube root of −8 is −2.

Kini áríǹ kúbù tí 27?

O jẹ 27^(1/3) = 3, nitori3ti a fi pọ́nju 3 mú 27.

Bawo ni ààyè-iṣẹ́ "Ṣẹ̀dá" ṣe n ṣiṣẹ́?

Ó fi àwọn áríǹ̀ tí a kọ́lù kọ́lù sípò sí ìpàtó n. Tó bá jẹ́ pé ò fi àwọn fálù ìṣàmúlò-ètò rẹ̀ padà, àwọn áríǹ̀ ní ìṣàmúlò-ètò tó tọ́ - fún àwọn áríǹ̀ kúbù tí 27 ò fi 3 ^ 3 = 27 hàn.

Bawo ní mo tí lè rí àwọn àyọkà ìṣàmúlò-ètò àti àwọn

Fi àwọn ìpele ǹhàn sí 2. Fún àwọn ìṣàmúlò-ètò rádíkálì àwọn tí a tí ìṣàfihàn bíi 6√2, lò àwọn ìṣàmúlò-ètò àwọn áríǹ àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè àwọn ààyè

Kini asẹ̀rẹ̀ nth tí 1?

Aṣàfilọ́lẹ̀ nth tí 1 jẹ́ 1 ni gbogbo àkókò fún ìpele wòye, láti igba ti 1 tí a fi pọ́njù wòye jẹ́ 1.

API — ló àwọn ìṣàmúlò-ètò yìí láti inú ìṣàmúlò-ètò

Fi àwọn ìṣàmúlò-ètò yìí kọ̀ǹpútà yìí láti jẹ́ ààyè-iṣẹ́ JSON tí a tí fi pamọ́ - kò ní bọ́tìnì kan tí a fẹ́. Fi àwọn fálù ààyè-iṣẹ́ sílẹ̀ sí bí àwọn àwọn ìṣàmúlò-ètò àti JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Ka àwọn àkọlé API kíkún →

Àwọn Ààyè Ìjánu-ìṣàmúlò-ètò

GET https://calculator.free/api/v1/root/

curl

curl "https://calculator.free/api/v1/root/?value=27&degree=3"

JavaScript `fetch()`

const r = await fetch(
  "https://calculator.free/api/v1/root/?" + new URLSearchParams({
    "value": "27",
    "degree": "3"
  }));
const data = await r.json();
console.log(data.results);

Results are estimates for general guidance only, not financial, medical or tax advice.

Àkóónú ìṣàmúlò-ètò yìí

Àwọn Àtòjọ-ẹ̀yàn

Àwọn Ìṣàmúlò-ètò Ìṣàmúlò-ètò

Àwọn Ààyè Ìjánu-ìṣàmúlò-ètò

curl

JavaScript fetch()

JavaScript `fetch()`