පිනි බිංදුව ගණනය

වායු උෂ්ණත්වය සහ සාපේක්ෂ ආර්ද්‍රතාවය සිට පිනි බිංදුව සොයා, සුවපහසු ශ්රේණිගත සමග.

%
පිනිබිඳු අගය —
ඒක දැනෙන විදිහ —

ඔබ ටයිප් ලෙස ප්රතිඵල යාවත්කාලීන.

මේ කැල්ක්යුලේටරය ඔයාට හරි උත්තරය දුන්නද?

මෙම කැල්ක්යුලේටරය ගැන

The dew point is the temperature to which air must be cooled for its water vapour to start condensing into dew, and it is the most honest single measure of how much moisture the air actually holds. A higher dew point means more water in the air and a muggier, stickier feel; it is also the temperature at which fog forms, grass gets damp overnight and a cold drink beads with condensation. This dew point calculator derives it from the air temperature and the relative humidity you enter.

It uses the Magnus-Tetens approximation with the Alduchov-Eskridge coefficients (a = 17.625, b = 243.04 °C): first γ = ln(RH / 100) + aT / (b + T), then the dew point = bγ / (a − γ), with T in °C. As a worked example, air at 25 °C and 60% relative humidity has a dew point of about 16.7 °C — comfortable edging toward sticky. Drop the humidity to 30% at the same 25 °C and the dew point falls to roughly 6 °C, distinctly dry. The method is accurate to within a few tenths of a degree across ordinary weather, and the tool works in either °C or °F.

Dew point predicts comfort far better than relative humidity, because relative humidity depends on temperature: 90% humidity on a cold morning feels dry, while 60% on a hot afternoon feels oppressive. As an absolute measure, dew point cuts through that — below about 13 °C (55 °F) feels comfortable, 16–18 °C (60–65 °F) starts to feel sticky, and above 21 °C (70 °F) is oppressive and hard to cool down in. The same value tells you when condensation will form on windows, pipes and aircraft surfaces.

නිතර අසන ප්රශ්න

පිනි බිංදුව සඳහා භාවිතා කරන සූත්රය කුමක්ද?

ඇල්ඩූචොව්-එස්ක්‍රිජ් නියතයන් සහිත මැග්නස්-ටෙටෙන්ස් ආසන්නනය: γ = ln(RH/100) + 17.625·T/(243.04+T), සහ පිනි දොළහ = 243.04·γ/(17.625−γ), T °C හි දී.

ඇයි පිනි බිංදුව තෙතමනයට වඩා වැදගත් වෙන්නේ?

සාපේක්ෂ ආර්ද්‍රතාව උෂ්ණත්වය මත රඳා පවතී, ඒ නිසා 90% දී ආර්ද්‍රතාව 10 ° C වියළි දැනෙනවා අතර 60% දී 30 ° C muggy දැනෙනවා. පිනි බිංදුව ආර්ද්‍රතාවය සම්පූර්ණ පියවර වේ, ඒ නිසා එය වාතය ඇත්තටම වඩා හොඳ හැඟීමක් කොතරම් ඇලෙන සුළු ලුහුබැඳීම.

මොන පිනි බිංදුවද පහසු?

13 °C (55 °F) ට අඩු උෂ්ණත්වයකදී සුවපහසුව හා වියළි බව දැනෙන අතර 16-18 °C (60-65 °F) දී ඇලෙන සුළු බව දැනෙන අතර 21 °C (70 °F) ට වැඩි උෂ්ණත්වයකදී සිසිල් වීම අපහසු වේ.

පිනි බිංදුව වායු උෂ්ණත්වයට වඩා ඉහළ වෙන්න පුළුවන්ද?

නැහැ. වැඩිම පිනි බිංදුව වායු උෂ්ණත්වය සමාන වේ, එය වාතය සම්පූර්ණයෙන්ම සංතෘප්ත විට 100% සාපේක්ෂ ආර්ද්‍රතාවය සිදු වන. ඕනෑම සිසිලන හා වාෂ්ප ඝනකරණය, ඒ නිසා පිනි බිංදුව හැම විටම වත්මන් උෂ්ණත්වය හෝ ඊට අඩු වේ.

පිනි බිංදුව මීදුම හා පිනි සකස් කිරීම සම්බන්ධ වන්නේ කෙසේද?

මතුපිට හෝ පිනි බිංදුවට සිසිල් වාතය විට, වාෂ්ප ඝනීභවනය - තණකොළ මත පිනි ස්ථානගත වන විට බව, මිදුල ආකෘති හා සීතල වීදුරු මත ඝනීභවනය පබළු. රාත්රී අඩු අසල පිනි බිංදුව හොඳ සංඥාවක් මිදුල හෝ පිනි විය හැකි වේ.

උෂ්ණත්වය වෙනස් වන විට පිනි බිංදුව වෙනස් වේද?

එයම නොවේ - පිනි බිංදුව සත්ය තෙතමනය අන්තර්ගතය පිළිබිඹු, වාතය උණුසුම් හෝ සිසිල් ලෙස තබා සිටින. උෂ්ණත්වය වෙනස් වන දේ සාපේක්ෂ ආර්ද්‍රතාවය වේ, පිනි බිංදුව muggy වාතය ස්ථාවර පියවර වන්නේ ඇයි.

මේකෙන් භාවිතා කරන මැග්නස්-ටෙටින්ස් සූත්‍රය කොච්චර නිවැරදිද?

ඩෙකාට්ගේ සිද්ධාන්තය අනුව යම්කිසි ද්‍රව්‍යයක ඝනත්වය එහි ඝනත්වයට සමාන වන අතර ද්‍රවයක් ඝනත්වයට සමාන වන විට ද්‍රවයේ ඝනත්වය ඝනත්වයට සමාන වේ.

❤️ ආදරය Calculator.Free? ඒක බෙදාගන්න

𝕏  X Facebook Reddit
API - කේතය සිට මෙම කැල්ක්යුලේටරය භාවිතා

කිසිදු යතුරක් අවශ්ය - නිදහස් JSON අවසන් ස්ථානයක් ලෙස මෙම ගණනය කිරීම් ඇමතුම්. විමසුම් පරාමිතීන් හෝ JSON ලෙස පහත ක්ෂේත්ර අගයන් යවන්න. ඔබ අතහැර දමන ඕනෑම දෙයක් මෙම පිටුව සමග පෙර පිරවීම වන එම පෙරනිමි භාවිතා; නොදන්නා පරාමිතියක් 400 වේ, නිහඬ ශුන්ය කිසි විටෙකත්. සම්පූර්ණ API ලේඛන කියවන්න →

අවසාන ස්ථානය

GET https://calculator.free/api/v1/dew-point/

curl

curl "https://calculator.free/api/v1/dew-point/?units=c&temp=25&humidity=60"

JavaScript fetch()

const r = await fetch(
  "https://calculator.free/api/v1/dew-point/?" + new URLSearchParams({
    "units": "c",
    "temp": "25",
    "humidity": "60"
  }));
const data = await r.json();
console.log(data.results);

ප්රතිඵල සාමාන්ය මග පෙන්වීම සඳහා පමණක් ඇස්තමේන්තු, මූල්ය, වෛද්ය හෝ බදු උපදෙස් නොවේ.