Dauwpuntcalculator

Vind het dauwpunt van luchttemperatuur en relatieve vochtigheid, met een comfortabel niveau.

%
Dauwpunt —
Hoe het voelt —

Resultaten update als u typt.

Heeft deze rekenmachine je het juiste antwoord gegeven?

Over deze rekenmachine

The dew point is the temperature to which air must be cooled for its water vapour to start condensing into dew, and it is the most honest single measure of how much moisture the air actually holds. A higher dew point means more water in the air and a muggier, stickier feel; it is also the temperature at which fog forms, grass gets damp overnight and a cold drink beads with condensation. This dew point calculator derives it from the air temperature and the relative humidity you enter.

It uses the Magnus-Tetens approximation with the Alduchov-Eskridge coefficients (a = 17.625, b = 243.04 °C): first γ = ln(RH / 100) + aT / (b + T), then the dew point = bγ / (a − γ), with T in °C. As a worked example, air at 25 °C and 60% relative humidity has a dew point of about 16.7 °C — comfortable edging toward sticky. Drop the humidity to 30% at the same 25 °C and the dew point falls to roughly 6 °C, distinctly dry. The method is accurate to within a few tenths of a degree across ordinary weather, and the tool works in either °C or °F.

Dew point predicts comfort far better than relative humidity, because relative humidity depends on temperature: 90% humidity on a cold morning feels dry, while 60% on a hot afternoon feels oppressive. As an absolute measure, dew point cuts through that — below about 13 °C (55 °F) feels comfortable, 16–18 °C (60–65 °F) starts to feel sticky, and above 21 °C (70 °F) is oppressive and hard to cool down in. The same value tells you when condensation will form on windows, pipes and aircraft surfaces.

Veelgestelde vragen

Welke formule wordt gebruikt voor het dauwpunt?

De Magnus-Tetens benadering met Alduchov-Eskridge constanten: γ = In(RH/100) + 17.625·T/(243.04+T), en dauwpunt = 243.04·γ/(17.625−γ), met T in °C. Het is nauwkeurig tot binnen een paar tienden van een graad ten opzichte van normale weersomstandigheden.

Waarom is dauwpunt belangrijker dan vochtigheid?

Relatieve luchtvochtigheid is afhankelijk van temperatuur, dus 90% vochtigheid bij 10 °C voelt droog aan terwijl 60% bij 30 °C moggy voelt. Dauwpunt is een absolute maat van vocht, dus het volgt hoe kleverig de lucht eigenlijk veel beter voelt.

Welk dauwpunt voelt comfortabel aan?

Below about 13 °C (55 °F) feels comfortable and dry, 16–18 °C (60–65 °F) starts to feel sticky, and above 21 °C (70 °F) is oppressive and hard to cool down in.

Kan het dauwpunt ooit hoger zijn dan de luchttemperatuur?

Nee. Bij hoogstens de dauwpunt is gelijk aan de luchttemperatuur, die bij 100% relatieve vochtigheid optreedt wanneer de lucht volledig verzadigd is. Elke koeler en damp condenseert, zodat het dauwpunt altijd bij of onder de huidige temperatuur ligt.

Hoe is dauwpunt gerelateerd aan mist en dauwvorming?

Wanneer oppervlakken of de lucht afkoelen tot het dauwpunt, condenseert damp..dat is wanneer dauw zich vestigt op gras, mist vormen en condensatie kralen op een koud glas. Een dauwpunt dicht bij de nacht laag is een goed teken mist of dauw is waarschijnlijk.

Verandert het dauwpunt wanneer de temperatuur verandert?

Niet op zichzelf.. Het dauwpunt weerspiegelt het werkelijke vochtgehalte, dat blijft zitten als de lucht warmt of koelt. Wat verandert met de temperatuur is de relatieve vochtigheid, dat is waarom dauwpunt is de vastere maat van de mokgy lucht.

Hoe nauwkeurig is de Magnus-Tetens formule die dit gebruikt?

Met de Alduchov-Eskridge coëfficiënten is het nauwkeurig tot binnen enkele tienden van een graad Celsius over de normale reeks van weertemperaturen en vochtigheiden, die goed binnen de precisie van de dagelijkse vochtigheidsmetingen.

❤️ Liefde Calculator.Free? Deel het

𝕏  X Facebook Reddit
API

Noem deze rekenmachine als een gratis JSON eindpunt.. geen sleutel nodig. Stuur de veldwaarden hieronder als query parameters of JSON. Alles wat je weglaat gebruikt dezelfde standaard als deze pagina is voorgevuld met; een onbekende parameter is een 400, nooit een stil nul. Lees de volledige API docs →

Eindpunt

GET https://calculator.free/api/v1/dew-point/

curl

curl "https://calculator.free/api/v1/dew-point/?units=c&temp=25&humidity=60"

JavaScript fetch()

const r = await fetch(
  "https://calculator.free/api/v1/dew-point/?" + new URLSearchParams({
    "units": "c",
    "temp": "25",
    "humidity": "60"
  }));
const data = await r.json();
console.log(data.results);

De resultaten zijn schattingen voor algemene richtsnoeren, niet voor financieel, medisch of fiscaal advies.