Àwọn Ìṣàmúlò-ètò

Ṣẹ̀dà àtòjọ-ìṣàmúlò-ètò ìṣàmúlò-ètò ní pàtó àwọn àmì-ìwé àìdájú àwọn àwọn ìṣàmúlò-ètò.

Àwọn Ìgúnrégé

Àwọn ìṣàmúlò-ètò ?

Àwọn fálù tí a tí ìṣàmúlò-ètò náà lò nínú ìparí ìṣàmúlò-ètò rẹ̀.

Ìyàn

Àwọn Ìṣàmúlò-ètò

Àwọn ìṣàmúlò-ètò ?

2 = ìgbàdúró àwọn ìṣàfarawé.

Ìgbàdúró —

Ìjádé ìṣàmúlò-ètò —

Àwọn ààyè-iṣẹ́ —

Àwọn Àtòjọ-ẹ̀yàn àwọn ìṣàmúlò-ètò

Ńlà àwọn àwọn ààtò àtòjọ-ẹ̀yàn yìí?

Àkóónú ìṣàmúlò-ètò yìí

Depreciation spreads the cost of an asset over its useful life, and this depreciation calculator builds the full schedule for you. It supports the three most common methods — straight-line (an equal amount each year), declining-balance (accelerated, a fixed percentage of the falling book value) and sum-of-the-years’-digits (accelerated, weighted by remaining life) — and reports the yearly expense, accumulated depreciation and remaining book value.

Straight-line divides the depreciable base (cost minus salvage) evenly across the life. For example, a 50,000 asset with 5,000 salvage over 5 years depreciates 9,000 a year. Double-declining balance instead applies twice the straight-line rate to the current book value, so year one is 50,000 × 40% = 20,000 and later years shrink — front-loading the expense while never dropping below salvage.

Use it to plan book or tax depreciation, to compare how each method affects early-year expense, or to produce a schedule for accounting records. Accelerated methods suit assets that lose most value when new, while straight-line is simplest; tax rules may dictate the method for a given asset.

Àwọn Àtòjọ-ẹ̀yàn

Àwọn ìṣàmúlò-ètò ìṣàfarawé kọ̀ǹpútà wo ni mò yẹ ki n lo?

Àwọn àwọn ààyè àìdálẹ̀ ní àwọn tí ò lè jẹ́ àwọn tí ò lè jẹ́ àwọn tí ò lè jẹ́. Àwọn àwọn à

Bawo ní a tí n ṣiṣẹ́ àwọn ìṣàmúlò-ètò ìṣàfarawé àwọn ìṣàmúlò-ètò?

Ó fi àwọn ìṣàmúlò-ètò mejì lórúkọ-ìjádé (fákìtó 2 ÷ ìbílẹ̀) lórúkọ-ìjádé tí a tì fi kù ní gbogbo odun, láti jẹ́ pé owó tí a fi kù nígbà kan. Ó kò bá jẹ́ pé ò kù nínú àwọn àwọn ìṣàmúlò-ètò ìdáràn, àtí àtòjọ-ìṣàmúlò-ètò náà tí ò fi àwọn odun tó kù nínú ìdáràn.

Àwọn àwọn ìṣàmúlò-ètò

Salvage value is the estimated worth of the asset at the end of its useful life — what you could sell it for as scrap or resale. Depreciation only writes down the cost above salvage, so a higher salvage value means less total depreciation.

Kini ìyatọ̀ laarin àwọn àyọkà ìṣàfarawé àti àwọn ìṣàfarawé àwọn ìṣàmúlò-ètò?

Straight-line charges the same expense every year, giving a steady, simple schedule. Accelerated methods (declining-balance and sum-of-years-digits) charge more in the early years and less later, which can defer taxes and better match assets that lose value fastest when new.

Bawo ní ìṣàmúlò-ètò ìṣàmúlò-ètò-tí-àwọn-àdíẹ̀tì-àwọn-

It weights the depreciable base by remaining life over the sum of the years’ digits. For a 5-year asset the digits sum to 15, so year one takes 5/15 of the base, year two 4/15, and so on — an accelerated pattern that tapers more gently than declining balance.

Ìyàn àti àwọn ìṣàmúlò-ètò wo ní mò fẹ́ fìpamọ́?

Use the number of years you expect the asset to be productive; tax systems publish standard lives for asset classes. The declining-balance factor sets how accelerated the method is — 2 gives double-declining balance, 1.5 gives 150%-declining balance.

API — ló àwọn ìṣàmúlò-ètò yìí láti inú ìṣàmúlò-ètò

Fi àwọn ìṣàmúlò-ètò yìí kọ̀ǹpútà yìí láti jẹ́ ààyè-iṣẹ́ JSON tí a tí fi pamọ́ - kò ní bọ́tìnì kan tí a fẹ́. Fi àwọn fálù ààyè-iṣẹ́ sílẹ̀ sí bí àwọn àwọn ìṣàmúlò-ètò àti JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Ka àwọn àkọlé API kíkún →

Àwọn Ààyè Ìjánu-ìṣàmúlò-ètò

GET https://calculator.free/api/v1/depreciation/

curl

curl "https://calculator.free/api/v1/depreciation/?cost=50000&salvage=5000&life=5&method=straight"

JavaScript `fetch()`

const r = await fetch(
  "https://calculator.free/api/v1/depreciation/?" + new URLSearchParams({
    "cost": "50000",
    "salvage": "5000",
    "life": "5",
    "method": "straight"
  }));
const data = await r.json();
console.log(data.results);

Results are estimates for general guidance only, not financial, medical or tax advice.

Àkóónú ìṣàmúlò-ètò yìí

Àwọn Àtòjọ-ẹ̀yàn