Àwọn Ìṣàmúlò-ètò

Wá àwọn àkókò àwọn ààtò àwọn ààtò àwọn ààtò àwọn ààtò àwọn ààtò àwọn ààtò àwọn ààtò àwọn ààtò àwọn ààtò àwọn ààtò

Ìgbà ìtàn —

Àwọn àkókò àwọn àkókò —

Àwọn àkóónú àwọn àkóónú —

Àwọn ìṣísẹ̀ ìtàn —

Àwọn Àtòjọ-ẹ̀yàn àwọn ìṣàmúlò-ètò

Ńlà àwọn àwọn ààtò àtòjọ-ẹ̀yàn yìí?

Àkóónú ìṣàmúlò-ètò yìí

A time duration calculator works out how long there is between two times of day. Enter times in 24-hour HH:MM or with AM/PM (e.g. 5:30 pm). If the end time is earlier than the start, it assumes the period runs past midnight into the next day. The result is shown in hours and minutes, as decimal hours, and as a total number of minutes and seconds.

The tool converts each time to minutes past midnight, subtracts the start from the end, and — if that comes out negative — adds 24 hours so an overnight span reads as a positive length. The same duration is then presented three ways: as plain hours and minutes for reading, as decimal hours for payroll and billing, and as raw minutes and seconds for finer work. It mixes formats freely, so you can type one time in 24-hour and the other with AM/PM.

For example, from 9:00 am to 5:30 pm is 8 hours 30 minutes, or 8.5 decimal hours, or 510 minutes; from 22:00 to 06:00 it correctly returns 8 hours by rolling past midnight. Common uses are timing a shift or a task, working out how long an event lasts, or converting a start-and-end pair into the decimal hours a timesheet needs.

Àwọn Àtòjọ-ẹ̀yàn

Ńpa tí àkókò ìparí bá jẹ́ láti àkókò ìṣàmúlò-ètò?

The calculator treats it as an overnight period and adds 24 hours. A shift from 22:00 to 06:00 is therefore counted as 8 hours, not a negative span.

Ń lè fi àwọn àkókò àwọn àkókò àti àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò

Ya. Àwọn ìrísí-lẹ́tà 24-àì (17:30) àti 12-àì (5:30 pm) ní a gba fún ààyè kan, láti lè fi àwọn àwọn ìrísí-lẹ́tà tí o fẹ́ pọ̀.

Àwọn ààyè-iṣẹ́ àwọn ààyè-iṣẹ́

Decimal hours (for example 8.5 instead of 8 h 30 m) are what payroll and billing systems use, since you multiply them directly by an hourly rate.

Bawo ni mo ṣe lè yipada àwọn àkókò láti inú àwọn àkókò àwọn àkókò?

Fi àwọn àkókò pàtó nípa 60: 30 àkókò ní àkókò 0.5 àti 15 àkókò ní àkókò 0.25. Àwọn kálẹ̀tì náà tí a fi pamọ́ fún ọ̀rọ̀ náà láti fi àwọn àkókò àwọn àkókò pamọ́.

Ń fi àkójútó àkójútó àwọn ààyè-iṣẹ́ pamọ́?

Kò. Àtòjọ-ẹ̀yàn yìí náà náà gba àwọn ààyè àìdájú ààyè laarin àwọn àkókò meji. Àwọn ààyè àìdájú ààyè tí a kò fi pamọ́ láti inú iṣẹ́ ìjánu-ìjánú, lò àwọn ààyè àwọn ààyè àti àwọn kàadì ààyè, tí àwọn náà ní ààyè ìjánu-ìjánú.

Can this time duration calculator handle a span longer than 24 hours?

O tí a ṣè fún àwọn àkókò àwọn àkókò meji nínú ọjọ̀ kan (tabí àwọn àkókò tí a fi pamọ́ láti inú ọjọ́ kan sí tí a fi pamọ́ sínú ọjọ́ kejì), láti jẹ́ pé àwọn àkókò tí o jú lọ nínú àkókò 24 àwọn àkókò. Fún àwọn àkókò ọjọ́ mìíràn ló kọ́ǹpútà alágbèéká ìṣàfarawé ìdátà.

Ìgbà wò nínú àwọn àkókò 8 àti àwọn àkókò 30?

Ó jẹ́ àwọn àkókò 510 — 8 × 60 jẹ́ 480, tí a fi 30 papọ. Àwọn kálẹ́ndà náà ṣàfihàn àwọn àkókò àwọn àkókò yìí ní pàtó àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò àwọn àkókò

API — ló àwọn ìṣàmúlò-ètò yìí láti inú ìṣàmúlò-ètò

Fi àwọn ìṣàmúlò-ètò yìí kọ̀ǹpútà yìí láti jẹ́ ààyè-iṣẹ́ JSON tí a tí fi pamọ́ - kò ní bọ́tìnì kan tí a fẹ́. Fi àwọn fálù ààyè-iṣẹ́ sílẹ̀ sí bí àwọn àwọn ìṣàmúlò-ètò àti JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Ka àwọn àkọlé API kíkún →

Àwọn Ààyè Ìjánu-ìṣàmúlò-ètò

GET https://calculator.free/api/v1/time-duration/

curl

curl "https://calculator.free/api/v1/time-duration/?start=09:00&end=17:30"

JavaScript `fetch()`

const r = await fetch(
  "https://calculator.free/api/v1/time-duration/?" + new URLSearchParams({
    "start": "09:00",
    "end": "17:30"
  }));
const data = await r.json();
console.log(data.results);

Results are estimates for general guidance only, not financial, medical or tax advice.

Àkóónú ìṣàmúlò-ètò yìí

Àwọn Àtòjọ-ẹ̀yàn