Kalkulilo de rezistilkoloraj kodoj

Decode 4/5/6-band resistor colours into a value — or reverse a value into bands.

Ĝi estas uzata por 5- kaj 6-bita operaciumo.
Ω
Reverse mode: la valoro por kodi en bendoj.
Resistance —
Tolerance —
Value range —
Band colours —

Results update as you type.

Did this calculator give you the right answer?

Pri tiu kalkulilo

The resistor color code is the scheme of coloured bands painted on a resistor to show its value, used because the parts are too small to print numbers on. Reading left to right, the first bands are significant digits, the next band is a power-of-ten multiplier and the last band is the tolerance. For a 4-band part the value is (10 × digit1 + digit2) × 10^multiplier ohms; 5- and 6-band parts add a third significant digit for tighter precision (and, on 6-band parts, a temperature-coefficient band). Each colour maps to a fixed number: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, grey 8, white 9, with gold and silver serving as ×0.1 and ×0.01 multipliers or ±5% and ±10% tolerances.

As a worked example, the classic brown-black-red-gold band pattern reads as digits 1 and 0, a ×100 multiplier and ±5% tolerance: (10 + 0) × 100 = 1,000 Ω, i.e. a 1 kΩ ±5% resistor whose true value lies anywhere from 950 Ω to 1,050 Ω. Decode any part by selecting the colour of each band from the drop-downs and the calculator returns the nominal resistance, the tolerance and the guaranteed value range.

Switch to reverse (encode) mode to go the other way: type a target resistance and the tool rounds it to the nearest value the digit bands can express, chooses the multiplier to match, and lists the band colours you would read off a real resistor of that value — handy when you have a schematic value and need to find or verify the physical part on your bench.

Oftaj demandoj

Kiel funkcias la rezistoraj koloraj bendoj?

La unuaj du (aŭ tri) bendoj donas la signifajn ciferojn, la sekva estas multiplikilo de ×10ⁿ kaj la lasta estas la toleremo. Bruna-Nigra-Ruĝa-Ora = 1, 0, ×100, ±5% = 1 kΩ ±5%.

Kion signifas la tolerema zono?

Toleremo estas kiom la reala rezisto povas malproksimiĝi de la nominala valoro. ±5% 1 kΩ rezistilo povas mezuri ie ajn de 950 Ω al 1050 Ω.

Kiel inversa reĝimo elektas la bandojn?

Ĝi rondigas vian celon al la plej proksima valoro kiun la ciferaj bendoj povas esprimi, tiam elektas la multiplikilon tiel ke la legado kongruas - la samaj koloroj kiujn vi legus el reela rezistilo de tiu valoro.

Kio estas la diferenco inter 4-, 5- kaj 6-bendo rezistiloj?

4- benda rezistilo havas du ciferajn bendojn; 5- bendo aldonas trian ciferon por pli striktaj toleroj kiel ±1%; kaj 6- bendo aldonas finan temperatur- koeficientan bendon montrante kiom la valoro moviĝas po grado. Pli da bendoj ĝenerale signifas pli precizan parton.

Kiun finon de la rezistilo mi legu unue?

Komencu de la plej proksima fino kaj legu al la tolero- bendo, kiu estas kutime ora aŭ arĝenta kaj iomete apartigita de la resto. Se oro aŭ arĝento estas ĉe unu fino, tio estas la tolero- bendo, do legu de la kontraŭa fino.

Kion signifas la oraj kaj arĝentaj strioj?

En la multiplikilo- pozicio oro signifas ×0.1 kaj arĝento signifas ×0.01, donante sub- ohm valorojn. En la tolereco- pozicio oro signifas ±5% kaj arĝento signifas ±10% — la du plej komunaj ĉiutagaj toleroj.

Kial mia mezura rezisto ne kongruas precize kun la kodo?

La bendoj donas nominalan valoron plus toleran fenestron. ±5% 1 kΩ rezistilo povas legitime mezuri ie ajn de 950 Ω al 1,050 Ω, kaj temperaturo kaj aĝo povas movi ĝin plu, do malgranda malkonsisto sur multimetro estas tute normala.

❤️ Amo Calculator.Free? Komunigi ĝin

𝕏  X Facebook Reddit
API - uzi tiun kalkulilon el kodo

Alvoku tiun kalkulilon kiel liberan JSON- finpunkton - neniu ŝlosilo necesas. Sendu la malsuprajn kampovalorojn kiel demandparametroj aŭ JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Legi la plenan API- dokumentaron →

Finpunkto

GET https://calculator.free/api/v1/resistor-color-code/

curl

curl "https://calculator.free/api/v1/resistor-color-code/?mode=decode&bands=4&band1=1&band2=0&multiplier=2&tolerance=5"

JavaScript fetch()

const r = await fetch(
  "https://calculator.free/api/v1/resistor-color-code/?" + new URLSearchParams({
    "mode": "decode",
    "bands": "4",
    "band1": "1",
    "band2": "0",
    "multiplier": "2",
    "tolerance": "5"
  }));
const data = await r.json();
console.log(data.results);

La rezultoj estas taksadoj por ĝenerala gvidado nur, ne financa, medicina aŭ imposta konsilo.