Àwọn Ìjánu-ìṣàmúlò-ètò
Fún ìgbàdúnrégé àwọn ìjánu-ìjánù ààyè-iṣẹ́ láti inú àwọn ààyè-iṣẹ́ mérí náà.
Àwọn Àtòjọ-ẹ̀yàn àwọn ìṣàmúlò-ètò
Àkóónú ìṣàmúlò-ètò yìí
A length converter turns any distance measurement into another unit — millimeters, centimeters, meters and kilometers on the metric side, and inches, feet, yards and miles on the imperial side, plus the nautical mile and even the light-year for astronomical distances.
It works by converting your value to meters as a common base and then out to the unit you want, so any pair works in both directions. The key relationships are fixed by international definition: 1 inch = 2.54 cm exactly, 1 foot = 0.3048 m, 1 yard = 0.9144 m and 1 mile = 1,609.344 m.
Worked example: to convert 5 meters to feet, divide by 0.3048 (or multiply by 3.28084), giving about 16.4 feet. Going the other way, 100 feet is 100 × 0.3048 = 30.48 meters. Alongside the single conversion, a full table restates your distance in every unit from nanometers to light-years, so you never have to chain two conversions by hand.
Àwọn Àtòjọ-ẹ̀yàn
Ìgbà wò nínú àwọn ìtànì àwọn ààyè-iṣẹ́ nínú àwọn ààyè-iṣẹ́?
One meter equals about 3.28084 feet. To go the other way, one foot is exactly 0.3048 meters, because a foot is defined as 30.48 centimeters.
Ìgbà wò nínú àwọn kilómètó nínú ààyè kan?
One mile equals 1.609344 kilometers exactly, and one kilometer is about 0.621371 miles. The mile here is the international statute mile of 1,609.344 meters.
Kini nautical mile?
Nautical mile jẹ́ 1,852 mita - òkè àwọn iṣẹ́ju-aaya kan tí a lò nínú oju-ìlẹ̀ àti ààyè-ìjáde. Ò jẹ́ 15% pípẹ jú ilẹ̀ (ìdára) mile lọ.
Ìgbà wò nínú àwọn séntímétì nínú iǹẹ̀tì?
There are exactly 2.54 centimeters in an inch, so a foot (12 inches) is 30.48 cm. To go from centimeters to inches, divide by 2.54.
Bawo ni mo ṣe lè yipada àwọn mérín sí àwọn ìtà?
Àwọn ìṣàfarawe-ìgbà yìí tí n pánẹ́ẹ̀lì àwọn mérí nípa 3.28084 (tabi nípa 0.3048), bẹ́ẹ̀ nínú àwọn mérí 5 ní 16.4 àti 2 mérí ní 6.56 àwọn fúntì.
Ìgbà wò nínú àwọn ààyè àwọn ààyè?
Méètì kan ní àwọn 1.09361 yards, àti yádì kan ní àwọn 0.9144 yádì. Àwọn meji náà ní pẹ̀lú, eyi ní idì tí méètì kan àti yádì kan tí a fi gbọ́dọ̀ lórúkọ́ bí àwọn ìgbà tí a tì ǹṣe.
Kini àwọn ìṣàmúlò-ètò?
Oju-ọjọ-ìwọ̀ ní àwọn ààyè tí oju-ìwọ̀ ń lọ nínú odun kan - ní àwọn ìtàn 9.46 triliọnu kilọ́mità. O jẹ́ àwọn ààyè ìjádé, àti àwọn ààyè àìjádé, tí a lò fún ìṣàmúlò-ètò àwọn àwọn ààyè nlà laarin àwọn à
API — ló àwọn ìṣàmúlò-ètò yìí láti inú ìṣàmúlò-ètò
Fi àwọn ìṣàmúlò-ètò yìí kọ̀ǹpútà yìí láti jẹ́ ààyè-iṣẹ́ JSON tí a tí fi pamọ́ - kò ní bọ́tìnì kan tí a fẹ́. Fi àwọn fálù ààyè-iṣẹ́ sílẹ̀ sí bí àwọn àwọn ìṣàmúlò-ètò àti JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Ka àwọn àkọlé API kíkún →
Àwọn Ààyè Ìjánu-ìṣàmúlò-ètò
GET https://calculator.free/api/v1/length/
curl
curl "https://calculator.free/api/v1/length/?amount=1&from=m&to=ft"
JavaScript fetch()
const r = await fetch(
"https://calculator.free/api/v1/length/?" + new URLSearchParams({
"amount": "1",
"from": "m",
"to": "ft"
}));
const data = await r.json();
console.log(data.results);
Results are estimates for general guidance only, not financial, medical or tax advice.