Àwọn Ìjánu-ìpamọ́ Àtòjọ-ẹ̀yàn

Yí àwọn àwọn ààyè-iṣẹ́ dígital padà laarin àwọn bítì, báitì, KB, MB, GB, TB àti àwọn ààyè-iṣẹ́ binára.

Àwọn Ìgúnrégé

Lẹ́tà

Àwọn ààyè-iṣẹ́

Àwọn Àtòjọ-ẹ̀yàn —

Àwọn ìyipadà —

Àwọn Àtòjọ-ẹ̀yàn àwọn ìṣàmúlò-ètò

Ńlà àwọn àwọn ààtò àtòjọ-ẹ̀yàn yìí?

Àkóónú ìṣàmúlò-ètò yìí

A data storage converter changes a digital size between bits and bytes and their multiples, converting through the byte as a common base. It covers both the decimal SI units — kilobyte, megabyte, gigabyte, terabyte and petabyte, each a power of 1,000 — and the binary IEC units — kibibyte, mebibyte, gibibyte and so on, each a power of 1,024.

Keeping the two families apart is the whole point: 1 KB is 1,000 bytes but 1 KiB is 1,024 bytes, and the gap widens at each step, reaching about 10% by the terabyte. There are always 8 bits in a byte, whichever family you use.

Worked example: to convert 500 megabytes to gigabytes in SI units, divide by 1,000, giving 0.5 GB. To see why a "1 TB" drive shows as about 931 GiB, divide 1,000,000,000,000 bytes by 1,073,741,824, the number of bytes in a gibibyte. A results table lists the size in every unit at once, handy for sizing downloads, disks and bandwidth.

Àwọn Àtòjọ-ẹ̀yàn

Kilóbaiti kan ní 1000 àti 1024 àwọn bàítì?

It depends on the unit. The SI kilobyte (KB) is 1,000 bytes, while the binary kibibyte (KiB) is 1,024 bytes. Storage is usually sold in decimal units and reported by some software in binary ones, which is why a "1 TB" drive shows as ~931 GiB.

Ìgbà wò nínú àwọn bítìnì láti inú báyítì kan?

Àwọn bítìnì 8 nínú bàítì kan. Àwọn ìjánu-ìjánú nẹ́tiwọọki ní a fi sọ nínú bítìnì ní gbogbo àkókó, bẹ́ẹ̀ líǹkì 100 Mbps gbàwọlé ní gbogbo àkókó ní 12.5 MB ní gbogbo àkókó.

Ìgbà meló nínú gigabaiti kan ní megabyte kan?

Nínú àwọn ààtò̀ SI àwọn ìtàn, GB 1 = 1,000 MB. Nínú àwọn àtòjọ-ẹ̀yàn, GiB 1 = 1,024 MiB.

Kini idi ti disiki-ìrọ̀fún mìíràn

Manufacturers sell drives in decimal units (a "1 TB" drive is 1,000,000,000,000 bytes), but many operating systems report size in binary units. Dividing by 1,073,741,824 turns that 1 TB into about 931 GiB, so no space is actually missing.

Bawo ni mo ṣe lè yipada megabiti sí megabaiti?

Fi megabítì kọ̀ọ̀kan pọ̀ nípa 8, nitorí pé báyìtì kan ní 8 bítìtì. Àtòjọ-ẹ̀yàn 100 Mbps nípà yìí ń fi pamọ́ nípá 12.5 megabítìtì nínú sékètà, àti àtòjọ yìí ń tọjú bítìtì àti báyìtì nípá ìṣàfarawégbèyè 8-si-1.

Kini ìyatọ̀ laarin megabaiti náà àti mebibaiti náà?

Megabaiti kan (MB) ní 1,000,000 bàítì, nígbà tí mebibaiti kan (MiB) ní 1,048,576 bàítì (1,024²). Mebibaitì ìṣàfarawégbè ní àwọn 4.9% tí o jù lọ.

API — ló àwọn ìṣàmúlò-ètò yìí láti inú ìṣàmúlò-ètò

Fi àwọn ìṣàmúlò-ètò yìí kọ̀ǹpútà yìí láti jẹ́ ààyè-iṣẹ́ JSON tí a tí fi pamọ́ - kò ní bọ́tìnì kan tí a fẹ́. Fi àwọn fálù ààyè-iṣẹ́ sílẹ̀ sí bí àwọn àwọn ìṣàmúlò-ètò àti JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Ka àwọn àkọlé API kíkún →

Àwọn Ààyè Ìjánu-ìṣàmúlò-ètò

GET https://calculator.free/api/v1/data-storage/

curl

curl "https://calculator.free/api/v1/data-storage/?amount=1&from=mb&to=gb"

JavaScript `fetch()`

const r = await fetch(
  "https://calculator.free/api/v1/data-storage/?" + new URLSearchParams({
    "amount": "1",
    "from": "mb",
    "to": "gb"
  }));
const data = await r.json();
console.log(data.results);

Results are estimates for general guidance only, not financial, medical or tax advice.

Àkóónú ìṣàmúlò-ètò yìí

Àwọn Àtòjọ-ẹ̀yàn

Àwọn Ìṣàmúlò-ètò Ìṣàmúlò-ètò

Àwọn Ààyè Ìjánu-ìṣàmúlò-ètò

curl

JavaScript fetch()

JavaScript `fetch()`