श्रेणी गणक

अपनी कार्य संख्या और वजन को एकीकृत करें, या अंतिम-exmous स्कोर आप की आवश्यकता है.

%
%
%
%
%
%
%
%
%
%
%
%
%
अंतिम से पहले अपनी क्लास की आवश्यकता है.
%
प्रथम वर्ग की आवश्यकता: आप चाहते हैं कि पूरी क्लास की आवश्यकता हो.
%
आवश्यक अंतिम विधि: अंतिम परीक्षा का कितना मूल्य है.
कुल वर्ग —
अक्षर वाँ —
अंतिम पर आवश्यक अंक —
कुल वजन इस्तेमाल किया गया —

जैसे आप टाइप करते हैं, परिणाम अद्यतन करें.

क्या इस गणक आपको सही उत्तर दिया गया?

इस गणक के बारे में

A grade calculator finds your overall course grade from the scores you earned on each component and how much each is worth. It multiplies every score by its weight, adds the results and divides by the total weight, so it works even if your weights do not add up to exactly 100% — a partial gradebook still shows your standing so far. It also converts the result to a letter grade and shows a per-item breakdown and an earned-versus-remaining chart.

Worked example: homework 85% (weight 20), a midterm 90% (weight 30) and a final 88% (weight 50) give (85×20 + 90×30 + 88×50) ÷ (20 + 30 + 50) = 8800 ÷ 100 = 88%, a solid B+.

Switch to the “needed final” mode to work backwards: enter your current grade, your target and how much the final is worth, and it solves target = current × (1 − w) + final × w for the score you need on that final. If that score comes out above 100% the tool flags the target as not achievable, and if it is below 0% it tells you the grade is already secured. Students use both modes to track a class through the term and to plan exactly how hard to push on the last exam.

बार बार पूछे जाने वाले प्रश्न

वज़न घटाने की गणना कैसे की जाती है?

Each score is multiplied by its weight, the results are summed, and the total is divided by the sum of the weights. With an 85% homework (20%), 90% midterm (30%) and 88% final (50%), the grade is (85·20 + 90·30 + 88·50) ÷ 100 = 88%.

मैं मैं अंत पर नंबर की जरूरत कैसे मिल सकता है?

Switch to “Score needed on final” and enter your current grade, your target and the final’s weight. The tool solves target = current × (1 − w) + final × w for the final, so needing 90% overall from an 82% standing with a final worth 30% means you need (90 − 82 × 0.7) ÷ 0.3 ≈ 108.7% — a warning that the target is out of reach.

क्या होगा यदि मेरे वजन 100% तक जोड़ नहीं करते?

यह पूरी तरह से ठीक है — जो कि आपने प्रवेश किया है, वह कि जिनका कुल वज़न आप में है, एक आंशिक श्रेणी बुक अभी भी आपकी वर्तमान स्थिति देता है, और यह कुल वज़न की रिपोर्ट करता है ताकि आप देख सकें कि मार्ग कितना है ।

मेरा प्रतिशत कौन सा पत्र मिलता है?

उपकरण के अनुसार आपके कुल प्रतिशत मानक अमेरिका पैमाने पर दिखाएँ - 90% और ऊपर एक सीमा है, 80s एक बी, 70 एक सी, 60 एक डी और के नीचे, एक F के साथ और शून्य से प्रत्येक सीमा के भीतर। तो ऊपर दिए उदाहरण में 88% एक बी+ के रूप में दिखाई देता है।

क्या मैं तीन से भी ज़्यादा ज़िम्मेदारियाँ निभा सकता हूँ?

जी हाँ, इन बातों को स्पष्ट करने के लिए बहुत सारे छोटे विकल्प खुले हैं, हर एक अपने अंक और वज़न के साथ. शून्य वज़न पर रखी किसी भी वस्तु को नज़रअंदाज़ किया जाता है, इसलिए आप केवल उतनी ही प्रवेश कर सकते हैं जितनी कि आपने बुकबुक वास्तव में है.

सबसे महान श्रेणी मैं अभी भी मिल सकता है क्या है?

In needed-final mode, put 100 as the score you could earn on the final: the best possible overall grade is current × (1 − final weight) + 100 × final weight. If even that falls short of your target, the calculator shows the needed score as over 100% and marks it not achievable.

क्या आणविक न्यूक्लियस एक जीएपी गणक के रूप में समान है?

जी नहीं, आणविक वर्ग का प्रतिशत एक कक्षा की कक्षा की कक्षा की कक्षा की कक्षा की संख्या पाता है; एक जीएएडिसी क्लास कई वर्गों के अन्तिम अक्षर मिलाने, क्रेडिट घंटों से लेकर एक कक्षा औसत में योग देती है ।

❤️ प्यार Calculator.Free? इसे साझा करें

𝕏  X Facebook Reddit
एपीआई — इस गणक का प्रयोग कोड से करें

इस गणक को मुक्त JSON अंत बिन्दु के रूप में काल करें — कोई कुंजी आवश्यक नहीं. क्वैरी पैरामीटर या JSON के रूप में क्षेत्र मान भेजें. जो कुछ भी आप छोड़ देते हैं वह वही डिफ़ॉल्ट रूप में उपयोग करता है इस पृष्ठ से पहले से भरा हुआ है; एक अज्ञात पैरामीटर 400 है, कभी भी शांत शून्य नहीं. पूरा एपीआई खुराक पढ़ें →

अंत बिन्दु

GET https://calculator.free/api/v1/grade/

curl

curl "https://calculator.free/api/v1/grade/?mode=overall&s1=85&w1=20&s2=90&w2=30&s3=88&w3=50"

JavaScript fetch()

const r = await fetch(
  "https://calculator.free/api/v1/grade/?" + new URLSearchParams({
    "mode": "overall",
    "s1": "85",
    "w1": "20",
    "s2": "90",
    "w2": "30",
    "s3": "88",
    "w3": "50"
  }));
const data = await r.json();
console.log(data.results);

इसका नतीजा सिर्फ यह होता है कि वे न सिर्फ पैसे के, इलाज या कर - निकाले की सलाह मानते हैं ।