BTU 计算器( AC 和加热)

位于BTU的空调或加热器,从房间面积、气候、日光和占用面积。

冷却只是遮蔽的房间, 更需要更少、更阳光更明媚的房间。
两人以上每人增加大约600个BTU冷却量。
ft
所需能力(BTU/h) —
吨吨数 —
千瓦 —
建议赔偿额单位 —

输入结果时更新 。

这个计算器给你正确的答案了吗?

关于此计算器

A BTU (British Thermal Unit) is a unit of heat, and air conditioners and heaters are rated by how many BTU per hour they can move. This calculator estimates the capacity a room actually needs so you neither undersize the unit (which then runs flat out and never keeps up) nor oversize it (which short-cycles, wastes energy and leaves the room clammy). For cooling it starts from the U.S. EPA rule of thumb of about 20 BTU/h per square foot, then adjusts for ceiling height, sun exposure, occupancy and heat-producing rooms. For heating it scales the floor area by a BTU-per-square-foot factor that rises with a colder climate.

The cooling adjustments are: scale by ceiling height relative to the standard 8 ft; subtract about 10% for a heavily shaded room or add 10% for a very sunny one; add roughly 600 BTU for each occupant beyond the first two; and add about 4,000 BTU for a kitchen, where appliances throw off heat. As a worked example, a 300 sq ft moderate-climate living room with standard ceilings, average sun and two people needs about 300 × 20 = 6,000 BTU/h — a typical window-unit size. Heating that same room in a cold climate uses a factor near 60 BTU/sq ft, or roughly 18,000 BTU/h.

The result is also converted to tons and kilowatts and rounded up to a sensible unit size, using 1 ton of cooling = 12,000 BTU/h and 1 kW ≈ 3,412 BTU/h. So a 6,000 BTU need is about half a ton or 1.76 kW. These are planning estimates: a proper HVAC load calculation (Manual J) also weighs insulation, window quality, air leakage and local climate data, so treat the number as a well-informed starting point for shopping.

经常问到的问题

每平方英尺需要多少BTU?

冷却方面,每平方英尺每小时约20个BTU,这是标准的起点,因此300平方米房间需要大约6 000 BTU。 热气需要更多,从25个BTU/sqft在热气候下需要,到冷气候下需要60个。

太阳、人和厨房如何改变数字?

阳光灿烂的房间增加了大约10%,阴影阴影室减少了10%。 超过2个的每个占用者增加了大约600个BTU,厨房增加了大约4000个BTU,因为电器能提供热量。

生物和毒素组织如何转换成吨或千瓦?

空调一吨等于每小时12 000 BTU, 1千瓦约为3 412 BTU/h。 因此,12,000 BTU单位为1吨或大约3.5千瓦冷却。

高度上限会改变我需要的BTU吗?

是的。估计数是根据标准8英尺上限按比例计算,因此10英尺上限将所需上限提高约25%,因为空气量增加,条件更合适。设定高级选项的上限高度,以说明原因。

买个超大空调机组不好吗?

是的,一个超大单位能让空气快速冷却,但在它去除足够湿度之前就关闭,让房间冷却和吵闹,通过短程车浪费能源。 这就是为什么这个工具大小比重要小,而不是只挑最大的单位。

暖气需要BTU比冷却 在同一间房?

通常情况下,冷却工作主要取决于气候。 冷却工作开始于20个BTU/sqft,而热气候下供暖量则从25个BTU/sqft到冷气候下60个不等,因此冷气候室可能需要取暖量的数倍。

我能一平方米进入房间吗?

是。在应用BTU-per-sq-foot规则之前,将区域单位切换成平方米,计算器内部转换(1平方米2 10.76 平方米),以便您可以使用您的平面计划所用的单位。

❤️ 爱 Calculator.Free? 分享它

𝕏  X Facebook Reddit
API - 使用代码中的计算器

将此计算器称为自由 JSON 端点 。 不需要按键 。 将字段值发送到下面作为查询参数或 JSON 。 任何您省略的, 都会使用相同的默认值, 此页面预填的默认值是预填的; 未知参数是 400, 而不是静音零 。 读取 API 全部文件 →

终点

GET https://calculator.free/api/v1/btu/

curl

curl "https://calculator.free/api/v1/btu/?mode=cooling&units=sqft&area=300&climate=moderate"

JavaScript fetch()

const r = await fetch(
  "https://calculator.free/api/v1/btu/?" + new URLSearchParams({
    "mode": "cooling",
    "units": "sqft",
    "area": "300",
    "climate": "moderate"
  }));
const data = await r.json();
console.log(data.results);

成果仅是一般指导的估计数,而不是财务、医疗或税务咨询。