Bandwidth / Muter-muter wektu kalkulator

Ing ngisor iki gambar saka ukuran file lan kecepatan sambungan.

%
Muter- unduh —
Ukuran total ing megabit —

Hasil dioptimalake nalika sampeyan ngetik.

Did this calculator give you the right answer?

Ngendi kalkulator iki

A bandwidth calculator works out how long a file takes to transfer over a connection of a given speed, and the key to getting it right is the bits-versus-bytes distinction. File sizes are quoted in bytes — KB, MB, GB, TB — while connection speeds are quoted in bits per second — Kbps, Mbps, Gbps — and a byte is 8 bits. So the download time is the file size converted to bits (× 8), divided by the effective bit rate of the link. That single factor of 8 is why a connection’s headline number never matches the download figure you watch tick by.

As a worked example, a 1 GB file over a 100 Mbps connection is 1 GB × 8 = 8,000 megabits, and 8,000 / 100 = 80 seconds at the theoretical maximum — because 100 Mbps is only about 12.5 MB per second. Add a protocol-overhead allowance for the real world (TCP/IP headers, retransmissions, shared links) and the time stretches accordingly; a 10% overhead pushes that 80 s to about 89 s. The calculator also lists the speed expressed in bps, Kbps, Mbps, Gbps and MB/s for quick cross-checks.

You can switch between decimal units (1 KB = 1,000 bytes, the convention ISPs and drive makers use) and binary units (1 KiB = 1,024 bytes, how operating systems count), which shifts the numbers by a few percent — a "1 TB" decimal drive is about 931 binary GiB. This makes the tool handy for estimating backups and large downloads, sizing an internet plan, planning video streaming or uploads, and sanity-checking why a transfer is taking as long as it is.

Takon kang asring diajukake

Why is my download slower than my connection speed?

Speeds are quoted in megabits per second but files are measured in megabytes — a byte is 8 bits, so a 100 Mbps line moves about 12.5 MB per second at best. Protocol overhead, shared bandwidth and server limits reduce it further, which the overhead field models.

What is the difference between decimal and binary sizes?

Decimal units (used by ISPs and drive makers) treat 1 KB as 1000 bytes; binary units treat 1 KiB as 1024 bytes. A "1 TB" decimal drive is about 931 binary GiB, so the convention changes the transfer time slightly.

How do I convert Mbps to MB/s?

Divide by 8: 100 Mbps ÷ 8 = 12.5 MB/s. The calculator does this automatically and reports the resulting time in days, hours, minutes and seconds.

What should I set the protocol overhead to?

Real transfers lose a slice to TCP/IP headers, handshakes and retransmissions. 5–10% is a reasonable allowance for a healthy wired link; use more for Wi-Fi, mobile or congested connections. It shaves the effective speed and lengthens the estimate.

Mengapa 1 GB tidak selalu sama jumlah byte?

Ing ngisoré konvensi desimal 1 GB iku 1,000 baité, nanging sistem operasi asring ngitung ing biner ing ngendi 1 GiB iku 1,073,741,824 baité. Tombol pilihan byte-convensi kanggo ngcocogaké cara ukuran file sampeyan diukur kanggo wektu transfer sing bener.

Suwene kanggo ngundhuh file gedhé ing sambunganku?

Ngetik ukuran file lan kecepatan rencana lan maca wektu. Contoné, game 25 GB ing 100 Mbps butuh kira-kira 33 menit, sadurunge overhead - alat iki ngresiki asil dadi dina, jam, menit lan detik.

Apa iki ngitung kecepatan internetku?

Ora — iki nganggep wektu transfer saka kecepatan kang sampeyan paringaké, ora nganggep wektu iki kanggo mriksa garis sampeyan. Larapaké tes kecepatan kang kapisah kanggo nemokaken kacepetan nyata, banjur ketik angka iki ing kene kanggo nganggep wektu ngunduh sing nyata.

❤️ Cinta Calculator.Free? Bagiaké

𝕏  X Facebook Reddit
API — gunakake kalkulator iki saka kode

Panggenan kalkulator iki minangka titik pungkasan JSON gratis - ora ana kunci sing dibutuhaké. Kirimi nilai medan ing ngisor iki minangka parameter pitakonan utawa JSON. Anything you omit uses the same default this page is pre-filled with; an unknown parameter is a 400, never a silent zero. Waca dokumen API lengkap →

Titik pungkasan

GET https://calculator.free/api/v1/bandwidth/

curl

curl "https://calculator.free/api/v1/bandwidth/?size=1&size_unit=GB&speed=100&speed_unit=Mbps"

JavaScript fetch()

const r = await fetch(
  "https://calculator.free/api/v1/bandwidth/?" + new URLSearchParams({
    "size": "1",
    "size_unit": "GB",
    "speed": "100",
    "speed_unit": "Mbps"
  }));
const data = await r.json();
console.log(data.results);

Kajaba iku, ana uga sing ora bisa gawé gawéan, kaya ta dokter, insinyur, lan liya-liyané.